Electrical Repair

Common Electrical Problems We Fix

Your home's electrical system works hard every day. When problems occur, they often signal deeper issues that need immediate attention. The good news: most electrical problems are straightforward to diagnose and repair when handled by licensed professionals.

Flickering Lights

Flickering lights are more than just annoying—they indicate an electrical issue. Causes include loose connections at the fixture, dimmer incompatibility, incorrect bulb type, or deteriorating connections in your circuit panel. Some LED bulbs flicker on incompatible dimmers due to voltage regulation. Traditional incandescent and halogen bulbs require different dimmer circuits than modern LEDs.

NEC Compliance: Per NEC Article 210, we ensure all circuits are properly bonded and connections are secure. Loose connections create heat and are a fire hazard.

Dead Outlets & Switches

A dead outlet stops working for several reasons. First, check if a GFCI outlet upstream has tripped—GFCI outlets protect multiple downstream outlets. If that's not it, the breaker may have tripped, or the outlet itself has failed. Some older homes have tandem breakers or shared neutral conductors that create complications. Homes built before the 1980s sometimes have aluminum wiring, which oxidizes and loses conductivity.

What We Do: We test the outlet with a multimeter, check the breaker status, and trace the circuit if needed. If the outlet is faulty, we replace it with a new, properly rated outlet.

Tripping Circuit Breakers

A breaker trips when a circuit detects an overload or short circuit. Occasional trips mean the system is working—it's protecting you. Frequent trips are a warning sign. If the same breaker trips repeatedly:

• The circuit may be overloaded (too many devices drawing power)
• A short circuit may exist in a wire, outlet, or appliance
• The breaker itself may be failing and need replacement
• A ground fault may exist (water contact or moisture)

NEC 220 & 240: We follow NEC Articles 220 and 240 for circuit design and breaker sizing. Never replace a breaker with a higher amperage—that defeats safety. Instead, we redistribute loads or add new circuits.

Buzzing Sounds & Warm Outlets (Fire Hazards)

These are critical safety issues. Buzzing indicates arcing—electrical current jumping a gap and creating heat. Warm or hot outlets suggest high resistance in the connection, causing excessive heat buildup. Both conditions can ignite nearby materials and cause electrical fires. Never ignore these warning signs.

Causes include:

• Loose terminal screws in outlets or switches
• Corrosion from moisture or oxidation
• Failed outlet or switch component
• Undersized or damaged wiring
• Overloaded circuits

Call us immediately—we prioritize these for same-day service.

Our Electrical Diagnostic Process

Every repair starts with a thorough diagnosis. Here's what we do:

Types of Repairs We Handle

Safety & NEC Code Compliance

All electrical work must comply with the National Electrical Code (NEC). Georgia adopted the 2023 NEC. Key articles relevant to repairs:

• NEC 110: Inspection and maintenance of electrical installations
• NEC 210: Branch circuits and required outlets
• NEC 220: Branch circuit, feeder, and service calculations
• NEC 406: Receptacles, cord connectors, and attachment plugs
• NEC 410: Luminaires and lamp holders

Georgia requires all electrical contractors to be licensed and insured. We maintain full licensing with the Georgia Secretary of State.

Electrical Repair Cost Breakdown

Pricing varies based on problem complexity and location in Marietta/Cobb County. Here's what typical repairs cost:

Service Call Fee: $75–$100 (waived if you proceed with repairs). Same-day emergency service (nights/weekends) available with surcharge.

When to Call a Professional vs. DIY

Call us immediately: Tripping breakers, buzzing outlets, warm outlets, flickering lights, electrical shocks, burning smells, or any unsafe condition.

Do not DIY: Panel work, rewiring, heavy repairs, or any work requiring permits. Improper electrical work voids insurance, creates fire hazards, and may fail inspection.